      |
 |
  |
|
HVAC Systems Treatment
CS-430
is a liquid blend of
Molybdate corrosions inhibitors designed to control pitting and
corrosion in closed hot water and chilled systems.
CS-430 is a Nitrite free formula, making it resistant to biological
degradation.
APPLICATION
The recommended initial dosage CS-430 ranges from 4-5 kg/m³, depending
upon the severity of the biofouling.
Maintain 200-300 ppm as Mo in the system.
CS-470 is a concentrated liquid blend of corrosion inhibitors designed to control pitting and corrosion in closed chilled water and hot water systems. It will protect all metals commonly found in a closed system from corrosive attack.
APPLICATION
The recommended initial dosage CS-470 ranges from 4-5 kg/m³, depending upon the severity of the biofouling.
CS-470 should be added as a shock dose at regular intervals. Dosage calculations are based on the total water capacity and retention time of the system.
Water Bird Specialist will determine the effective dosage rate and establish a control procedure.
PRODUCT BENEFITS
Controls of both ferrous and non ferrous metals.
Compatible with solutions of alcohol and glycol-base antifreezes, and will not form sludge.
Non-corrosive to system metals at use concentrations
Doe not adversely affect pump glands, rubber hose, water seals, and valve packing
Easy to handle, economical to use.
PHYSICAL PROPERTIES
Appearance : Amber Liquid
pH : 12.0 – 12.5
Specific Gravity : 1.18-1.19
SAFETY PRECAUTIONS
CS-470 is harmful if taken internally.protecting, googles and gloves should be worn when handling the product. In case of contact with skin and eyes, immediately flush with plenty of water at least 15 minutes. Seek medical attention in case of ingestion obtain medical attention at once
